• View Companies:
RainShadow Fishing Rod Blanks is a Batson Enterprises brand

Decal Instructions

Decal Instructions

STEP 1 (STANDARD OR RUB OFF)

Peel the decal away from the backing

Make sure your work area and the surface you are applying the decal to is clean. Static energy created when peeling the transfer tape away from the backing will attract nearby dust or hair to the adhesive side of the decal.

STEP 2 (STANDARD OR RUB OFF)

Position the decal where you want it…Smooth the decal onto surface…

Use caution when placing decal as the adhesive on the decal is aggressive and intended to be permanent. Bending the decal slightly to allow placing from the center first, then outwards to the left and right edges reduces the risk of wrinkles or bubbles. Once the decal is placed, it cannot be removed without being damaged beyond use.

STEP 3 (RUB OFF ONLY)

Peel transfer tape away from decal…

Once decal is in place, use a hot blow Dryer for 10-15 seconds on the decal BEFORE removing transfer tape. After removing the transfer tape, lightly clean decal with isopropyl alcohol. Using denatured alcohol or stronger solvents will adversely effect the finish of the decal. If white adhesive is showing around an edge area, use a wooden toothpick to gently clean it away.

Contact Us

captcha

NEWSLETTER

Be the first to know what’s happening and special offers.